Okay. A couple things to clarify. The term 'pin' stands for GPIO pin, not actual physical pin on the ESP32 module, right? Because say Pin32 on the module corresponds to GPIO07, which does not have an ADC. Conversely, GPIO32 is Pin12 on the ESP module, which has an ADC channel listed. Is the audio si...

You can't get the spectrum just by connecting the si4732 audio output to pin 32 esp32. Audio should be supplied to pin 32 only after amplification and normalization within 3.3 volts. If you have an ATS25 receiver, then you don't need to add anything to setting.ini I have the ATS-120 receiver, not t...

Let's say I don't care about decoding, and I only want to see the audio spectrum. I route the audio to pin32 of the ESP module. What setting do I have to enable in the ini file so I can enable this feature?

Hi all, I made a Hungarian translation, but it won't work because the character set in the display font is not suitable. Perhaps, in a future release, would it be possible to either migrate away from this limited character set, or install some notation system in the language file so that the appropr...