Well, I have built some RX and am using the 4.16 software without problems. Now I have the RX V9 from IU4ALH (github) in the test with the new software 4.2. I tested it thoroughly again. In any case, the configuration changed in the setting.ini is displayed correctly in the INFO! However, there is o...

Thank you for testing the configuration! In my setting.ini posted here, I used port 27 twice and exactly this configuration worked perfectly for me. However, if I assign BTenablePin to 26, just like you have successfully tested, it doesn't work for me. That's strange. And it's still strange that the...

dua , Файл setting.ini после переустановки отсутствует в каталоге получателя. Вы можете найти его на своем компьютере по следующему пути: «C:\Program Files (x86)\Harduino\H-RADIO\Installer\firmware\files». Однако файл setting.ini по-прежнему общий и не адаптирован к вашему RX, и вам придется измени...

This configuration is working.
But I can not set BTenablePin for example to 26.

This configuration is working: // ========================= HARDWARE SETUP ========================= // ============================== PINS ============================== // ========================================= default TFT display pins // TFT_MISO 19 // TFT_MOSI 23 // TFT_SCLK 18 // TFT_CS 15 /...

Many thanks for the quick response. Yes, of course I used the new setting.ini. I mentioned the new variable names in my posting. So now I have to assume that the port assignments for the corresponding variables cannot be changed? Is that right?

Hello, With the new software version 4.2 AIR beta, is there now a specific port binding for LNAenablePin(26), antHiZPin(25), audioMutePin(27) and BTenablePin(27)? I found that these pins cannot be assigned other ports in the setting.ini. The pins can only be activated or deactivated. The only except...

Hello, thank you for your answer. But is it planned in the future that the Si5351 will replace the oscillator of the Si473x or is the use of an additional mixer planned for further development? My only concern is to replace the oscillator of the Si473x with a Si5351 in my own concept. Thank you for ...

Hello, Maybe someone can say something about the following hardware option: An Si5351 can be used instead of the crystal for the oscillator of the Si4732/35. The only thing that makes sense to me at the moment is that it means you don't have to get a high-precision, low-frequency crystal. With regar...

Hello, If I set the longwave band and select Retro Mode, the frequency is not tuned. However, the scale is moving. This effect can generally be seen with software versions 4.16 and 4.17beta. Retro mode works on the other bands. Has this problem already been noticed? I can see this effect on all my A...