Decoder HW Pins

[abryx]

Just a question about the decoding inputs:
I´m right that GPIO32 ist for decoding RTTY as analog Signal and GPIO39 is used to decode CW as digital Signal?
Wanted to use another decoder Hardware and pleased to know a little bit more about the internal handling if its possible ...
73 Andre

[Binns]

GPIO39 LM567 is used to decode CW and RTTY, but a waterfall is convenient for visual tuning, and GPIO32 LM386 is used for it. For the rest of the decoders, only GPIO32 is used.

[abryx]

Ah .. thanks!
The Decoder input Logic is only triggered by the PLL Output so i can use some other FSK Hardware too?
Best way to use my stored TCM3105

73 Andre