Форум HARDUINO

Just a question about the decoding inputs:
I´m right that GPIO32 ist for decoding RTTY as analog Signal and GPIO39 is used to decode CW as digital Signal?
Wanted to use another decoder Hardware and pleased to know a little bit more about the internal handling if its possible ...
73 Andre

GPIO39 LM567 is used to decode CW and RTTY, but a waterfall is convenient for visual tuning, and GPIO32 LM386 is used for it. For the rest of the decoders, only GPIO32 is used.

Ah .. thanks!
The Decoder input Logic is only triggered by the PLL Output so i can use some other FSK Hardware too?
Best way to use my stored TCM3105

73 Andre