ponti писал(а): ↑05 мар 2024, 23:09 I have installed a digital BT adapter and use it to transmit e.g. FT8 via Bluetooth to a smartphone and tablet.
Data transfer via A-Explorer is also possible.
It works perfectly.

Hi,

thank you for your help, I need to order a bluetooth adapter

73,s

Hi, Is there a possibility of sending via the wifi connection (without using the USB cable), the data (FT8, rtty, cw..) to a terminal :?: 73,s There is no such possibility now. But an application for remote connection is being developed. This feature is planned in the application Thank you for the ...

Hi,
Is there a possibility of sending via the wifi connection (without using the USB cable), the data (FT8, rtty, cw..) to a terminal
73,s

I have just looked at the datasheet of the decoder (HT567) it has a minimum operating voltage of 4.75 volts it must be replaced by an LM567 in the datasheet of this component its minimum voltage is 3.5v instead of 4, 75 v minimum for the original HT567 component to be tested Hi, Yes, although is sh...

I have just looked at the datasheet of the decoder (HT567) it has a minimum operating voltage of 4.75 volts it must be replaced by an LM567 in the datasheet of this component its minimum voltage is 3.5v instead of 4, 75 v minimum for the original HT567 component to be tested I wonder if for the liw ...

Yes, the aim of adding a 10,000 mAh battery is simply to bring the voltage down as slowly as possible to a critical voltage for the decoding chip. The problem with a 5 v voltage booster is the parasites it produces, we must not forget that he installed an LNA in the rx. I think this is why the manuf...

wonder about these voltage problems, and to avoid installing a boost circuit if the simplest thing would not be to change the original 3000 mAh battery with one of 6000 or even 10000 mAh :?: on aliexpress there are batteries for a few euros/dollars see if the sizes are right for it to fit in the RX ...

Good morning,
Thank you for your answers,
I just watched a video on YouTube from an owner of ats25 amp who shows us a Version 4.17 (official or not ) he also tests the LNA

Vidéo YouTube https://youtu.be/PjWIO8LOzkE?feature=shared

Good day to you

The ats25 AMP has an LNA, does it work well ?
Does it have good reception with or without the LNA ?

73 , SWL

Can anyone tell me if it is possible to decode the PSK31 with an ats25 AMP ?
Thank you