ats25 wifi data

[radi0]

Hi,
Is there a possibility of sending via the wifi connection (without using the USB cable), the data (FT8, rtty, cw..) to a terminal
73,s

[Binns]

Hi,
Is there a possibility of sending via the wifi connection (without using the USB cable), the data (FT8, rtty, cw..) to a terminal
73,s

There is no such possibility now. But an application for remote connection is being developed. This feature is planned in the application

[radi0]

Hi,
Is there a possibility of sending via the wifi connection (without using the USB cable), the data (FT8, rtty, cw..) to a terminal
73,s

There is no such possibility now. But an application for remote connection is being developed. This feature is planned in the application

Thank you for the answer

[ponti]

I have installed a digital BT adapter and use it to transmit e.g. FT8 via Bluetooth to a smartphone and tablet.
Data transfer via A-Explorer is also possible.
It works perfectly.

[Binns]

I have installed a digital BT adapter and use it to transmit e.g. FT8 via Bluetooth to a smartphone and tablet.

Please tell us in more detail how you do it

[G8PTN]

HI,
Something like the very cheap JDY-31 Bluetooth module connected to the serial data pins of the ESP32 should work.

JDY31.jpg (42.21 КБ) 7380 просмотров

I am not sure if the CH340 output would need to be disconnected, or if it is high impedance when not driving.
73, Dave

[radi0]

I have installed a digital BT adapter and use it to transmit e.g. FT8 via Bluetooth to a smartphone and tablet.
Data transfer via A-Explorer is also possible.
It works perfectly.

Hi,

thank you for your help, I need to order a bluetooth adapter

73,s

[ponti]

yes, somthing like this..if you have Problems with USB Cummunication after Install the BT Module, put a Diode in the RX Line, Kathode to the BT. TX Line its fine.
But in my case it works without.

[Binns]

There was an attempt to use the built-in Bluetooth in the ESP32, but so far there is no solution to the problem of insufficient memory of the microcontroller